Multitech Cellular Modems

The Configuration Guide for setting up an Uplogix Local Manager to use a Multitech modem.

Latest Updates:

  • 4.7 - Activation instructions for Verizon CDMA cellular modems
  • 4.6 - iCell modems require AT+WOPEN=0 to take them out of IP mode
  • 4.6 - CDMA do not appear to require the AT+CGDCONT command. If this command is not removed from the init string in config answer, ppp will fail as the modem will return ERROR when the local manager sends the AT+CGDCONT command.
Last updated on 2015-09-04 19:12:24 UTC.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments