How do I set the Local Manager's hostname?

The Local Manager's hostname can be changed from the CLI or through the Local Manager's Summary page on the Control Center.

Via Control Center

  1. Click on the Local Manager on the Inventory page
  2. Click IP in the Configuration section on the left side of the page
  3. Enter a hew hostname in the box marked Hostname:
  4. Click Save

The change will be reflected on the Local Manager after a successful heartbeat.

Via Command Line

Use the config system ip command to change the hostname.

[[email protected]]# config system ip
--- Existing Values ---
Use DHCP: No
Management IP:
Host Name: A101101134
Subnet Mask:
Broadcast Address:
Default Route:
Speed/duplex: auto:100full
MAC Address: 00:0F:2C:00:0B:E2
DNS Server 1:
DNS Server 2:
Bonding Link: yes
Front Ethernet Link: yes (bonded primary)
Aux1 Ethernet Link: yes (bonded)
Aux2 Ethernet Link: no (bonded)
Change these? (y/n) [n]: y
--- Enter New Values ---
Use DHCP (y/n) [n]:
Management IP []:
Host Name [A101101134]: UplogixLM <==========
Subnet Mask []:
Default Route []:
speed/duplex [auto]:
DNS Server IP 1 []:
DNS Server IP 2 []:
Warning: Remote connections may be lost if you commit changes.
Do you want to commit these changes? (y/n):
Do you want to commit these changes? (y/n):
Do you want to commit these changes? (y/n): y
Last updated on 2015-07-02 12:40:34 UTC.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request