Why does the Local Manager respond to pings but not SSH?

When a Local Manager boots up, it activates its network interfaces before starting the SSH service. The delay between the two depends on the hardware and can be extended during upgrades. If you cannot SSH to the Local Manager, check the front panel or console port. A scrolling LCD screen and a login prompt on the console indicate that the Local Manager is working properly.

This issue can also be caused by IP address conflicts. Use the front panel or console to verify the Local Manager's IP address.

Last updated on 2015-01-30 14:27:48 UTC.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request