The LCD is only showing Restart, Shutdown, and Factory Reset options.

If your front panel LCD is not displaying the Configure option, but still displays status information, the front panel keypad lockout has been enabled.

To toggle this setting using the CLI, use the config system keypad command.

[admin@u3200]# config system keypad
usage: keypad 

To toggle this setting from the Control Center, edit the setting under Configuration on the appliance detail page.

Restart, Shutdown, and Factory Reset will always be available from the front panel.

Last updated on 2015-01-16 16:08:29 UTC.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments