Why won't the CLI applet connect to the Uplogix appliance?

When attempting to connect to the Command Line Interface (CLI) of the Uplogix Appliance you see the following message:

Connecting to system...
Failed to initiate connection with 192.168.52.187.
Failed to initiate connection with 192.168.52.187.
Failed to initiate connection with 192.168.52.187.
Retry count exceeded aborting login.

Possible Causes:

  • No route to host. The CLI Applet runs locally on your workstation and therefore requires a valid route to the appliance.
  • Port blocked by firewall
  • Appliance is off
Last updated on 2015-09-03 20:41:33 UTC.
Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

  • Avatar
    James Dollar

    Some customers have used a socks proxy or NAT between the user networks and the Uplogix appliance. Check the applet settings in the Uplogix Control Center.